CR Technology has a huge inventory of rubber materials in stock and ready to fabricate for Gaskets, Seals, Washers, Spacers, Vibration Pads, Discs and Custom Shapes for a wide variety of applications. We also supply Molded O-Rings, Spliced (Vulcanized) O-Rings, Bumpers, Grommets and Extrusions.
CRT can fabricate any elastomer type imaginable and many other hard to find exotic materials. If you require any type of rubber material fabricated precisely to your drawing or custom specifications, let us supply it to you in rapid fashion.
We carry a large inventory of products instock and ready to fabricate for you. These include:
Durometer Range: 30 to 90
Temperature Range: -65°F to +160°F
Applications: Any situation where non- marking is desired, wipers, squeegee, certain medical
Not Recommended For
Typical Properties
Durometer Range: 20, 40, 50, 60, 70, 80
Temperature Range: -30°F to +212°F
Applications: V-belts, impellers, underground cables, hose, many different applications for seals. Gaskets, washers
Not Recommended For
Typical Properties
Durometer Range: 30A to 70D
Temperature Range: -60°F to +300°F
Applications: Gasoline hose, hydraulic parts, oil contact, linings, gaskets, washers, seals
Not Recommended For
Typical Properties
Durometer Range: (Shore A) 10 to 85
Temperature Range: -100°F to +400°F
Applications: Aviation, aerospace, electronics, healthcare, medical, food processing
Not Recommended For
Typical Properties
Durometer Range: (Shore A) 55 to 90
Temperature Range: 10°F to +400°F
Applications: Automotive seals, engine grommets, low outgassing computer seals
Not Recommended For
*Viton is a registered trademark of DuPont
Typical Properties
Durometer Range: (Shore A) 40 to 90
Temperature Range: -30°F to +260°F
Applications: Wire and cable, roll covers, hose, roofing membranes, water reservoir liners
Not Recommended For
*Hypalon is a registered trademark of DuPont
Typical Properties
Durometer Range: (Shore A) 30 to 80
Temperature Range: 50°F to +212°F
Applications: Shock mounts, bladders, membranes, inner tubes, bumpers, caulking, pharmaceuticals
Not Recommended For
Typical Properties
Durometer Range: (Shore A) 40 to 90
Temperature Range: -40°F to +270°F
Applications: “Wet” rollers, roofing membranes, windshield wiper blades, wire, cable and bladders
Not Recommended For
Typical Properties
Durometer Range: (Shore A) 40 to 60
Temperature Range: -100°F to +450°F
Applications: Aeronautical seals, highly specialized and extreme low temperature seals
Not Recommended For
Typical Properties
Durometer Range: (Shore A) 50 to 90
Temperature Range: -30°F to +160°F
Applications: Friction drive rolls, abrasion resistant wheels
Not Recommended For
Typical Properties
*NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets.